Omega Owners Forum
Trading Area => Car Parts, bits For Sale & Wanted => Topic started by: RobG on 24 October 2010, 16:14:57
-
Got an LPG system installed on the Irmy MV6. Don`t know nothing about `em. It`s an 80ltr tank sat behind the rear seats. If anyone is interested and prepared to remove (I`ll assist but as said, unsure about LPG). Oh yes, it`s got about £20 of gas in it. Name on the tank is STAKO. Thinking about £200 or thereabouts, not sure whether that`s too much or not. :-/ Couple of pics.
(http://i190.photobucket.com/albums/z257/belisensis/OMEGAFORUM/tankname.jpg)
(http://i190.photobucket.com/albums/z257/belisensis/OMEGAFORUM/gasfitting.jpg)
-
Might be interested, may have to come have a look, is this £200 for the whole kit?
And what's the kit in the engine end? Any makers name on the lpg ecu? Which will be there somewhere, a shot of the engine bay perhaps...?
-
Might be interested, may have to come have a look, is this £200 for the whole kit?
And what's the kit in the engine end? Any makers name on the lpg ecu? Which will be there somewhere, a shot of the engine bay perhaps...?
Take a piccy tomorrow AM Chris. I no sod all about LPG :-[ where would I look for the ECU, I`ve seen the injectors under the bonnet but that`s about it. Yep, whatever is there for the LPG, £200. Is that too much or what :-?. As said, wouldn`t be able to remove it on me tod but willing to assist (or hinder ;D)
-
Might be interested, may have to come have a look, is this £200 for the whole kit?
And what's the kit in the engine end? Any makers name on the lpg ecu? Which will be there somewhere, a shot of the engine bay perhaps...?
Take a piccy tomorrow AM Chris. I no sod all about LPG :-[ where would I look for the ECU, I`ve seen the injectors under the bonnet but that`s about it. Yep, whatever is there for the LPG, £200. Is that too much or what :-?. As said, wouldn`t be able to remove it on me tod but willing to assist (or hinder ;D)
Don't suppose you have any history giving age of the kit? How many miles has the kit done, long shot I know.....
I have installed but not removed a kit so....
-
Previous owner says he had it installed just under 3 years ago @ a cost of 2K and reckons he`s done about 40K. That`s all I know :-/
-
Previous owner says he had it installed just under 3 years ago @ a cost of 2K and reckons he`s done about 40K. That`s all I know :-/
Hmmm, not so bad.
Let's see the pics and hopefully come see it and pick up the bonnet, roof bars and straps :-/
-
If you come down, will it be in the car that needs the new bonnet :question
-
If you come down, will it be in the car that needs the new bonnet :question
Had that thought, could do I suppose, need to check the legal docs.....etc. Wishbones are a right state too.
-
If you come down, will it be in the car that needs the new bonnet :question
Had that thought, could do I suppose, need to check the legal docs.....etc. Wishbones are a right state too.
If it's not insured or taxed I can help out Chris. I've been to Rob's before, be nice to see him again. So if you need a driver I'll happily do whatever's needed :y
-
If you come down, will it be in the car that needs the new bonnet :question
Had that thought, could do I suppose, need to check the legal docs.....etc. Wishbones are a right state too.
Both bushes done on this one 8 months ago ;D ;D ;D
Josh, be nice to see you again Mate. Might get me quid back from your e-bay account ;D ;D ;D ;D ;D only kidding........... :D
-
If you come down, will it be in the car that needs the new bonnet :question
Had that thought, could do I suppose, need to check the legal docs.....etc. Wishbones are a right state too.
Both bushes done on this one 8 months ago ;D ;D ;D
Josh, be nice to see you again Mate. Might get me quid back from your e-bay account ;D ;D ;D ;D ;D only kidding........... :D
:D :D :D I'd forgotten about that. I think with interest it must be about £50 now ::)
If Chris does need a driver, I'll definitely be down. No doubt when I get there, I'll think of things I need to buy aswell. As soon as I knew the MV6 was yours, I desperately was trying to think of what I needed. And all I've come up with so far is plenum bolt caps :D
Does it have 'OMEGA' velour floor mats?
-
No Omega mats Josh. Haven`t studied under the bonnet yet
-
Shall we just swap cars Rob ;D
Might be a plan for next weekend guys...?
-
Couple of pics of the injectors Chris (Keihin), can`t find the ECU
(http://i190.photobucket.com/albums/z257/belisensis/OMEGAFORUM/P1040020.jpg)
(http://i190.photobucket.com/albums/z257/belisensis/OMEGAFORUM/P1040019.jpg)
This is the system fitted http://www.prinsautogas.com/en/products/vsi-lpg/vsi-lpg.html
-
well, its sequential multipoint anyway, not familiar with prins system, but if it doesnt lag then who cares...? bit of an oil leak going on, have you noticed where the those injectors lead to Rob? nozels should be on the manifold somewhere....appreciate you may not have got that far with it... ;)
-
Oil & "toffee" in abundance. Previous numpty was still using it for 2 mile runs after cooler had gave up. I`ll whip the plenum off tomorrow see if I can see owt
-
Sorry Chris, LPG system has been sold. Chap`s removing it Saturday.
-
if anything changes can you contact me plz i would buy it
cheers
-
Sorry Chris, LPG system has been sold. Chap`s removing it Saturday.
Oh, thought we where.... :-/ should have been clearer i suppose...
-
Sorry Chris, LPG system has been sold. Chap`s removing it Saturday.
Oh, thought we where.... :-/ should have been clearer i suppose...
Sorry mate, didn`t realise you actually wanted it :-[
-
Sorry Chris, LPG system has been sold. Chap`s removing it Saturday.
Oh, thought we where.... :-/ should have been clearer i suppose...
Sorry mate, didn`t realise you actually wanted it :-[
...too late now...
-
Sorry Chris, LPG system has been sold. Chap`s removing it Saturday.
Oh, thought we where.... :-/ should have been clearer i suppose...
Sorry mate, didn`t realise you actually wanted it :-[
...too late now...
As you said, should have been more clearer................