Omega Owners Forum
Newbie Area => Newbie Welcome Area => Topic started by: SmiffyMan on 26 June 2008, 15:55:49
-
Hi all,
Just sold my 190E Merc (Bag 'o carp!) and decided to get me another Omega. This will be my 4th. Got a 2000 MV6 Auto (110K) immaculate. Runs like a dream but does have the optional plugs covered in oil syndrome. Smokes a bit.
Sucked all the oil out with a long piece of tube (By mouth!) and tightened up the torques nuts. After two days still leaking a little on the exhaust but no oily plugs as yet. Got me a gasket (£23.00) (right side) SO THATS MY SATURDAY SORTED! Great site. Hope to get some great advise and stuff. Cheers. Ian. (Married, 2 sprogs, a wife. 2 cats, a dog, an MX5 Elan lookalike and this MV6).
-
Ola!!! and a warm welcome to the OOF :y
-
Hi and welcome to the forum :y
Make sure you clean the breathers, which is the reason the camcover gasket has blown ;)
-
Hi, welcome to the forum. :y
-
"Hello" and Welcome :)
-
Hello Smiffy and a warm welcome to this site! :y
There is plenty of advice on oily plugs etc on this site! :D ;)
-
Hi there and welcome :y
-
Welcome, enjoy the forum :)
-
Hello & Welcome :y
-
should really do both sides at same time tho
-
Hello and welcome :y
-
hello good evening and welcome :y
-
Hi SmiffyMan, welcome to the forum.
-
Hi and welcome to the forum :y
-
Hello and welcome.
-
Hi & welcome to the forum :y
-
Hello and welcome to the forum. :y
-
Hello and welcome to the OOF
-
Welcome to the OOF
-
Boody Hell - what a super friendly bunch you are! Don't suppose you all fancy comming round to mine and doing my cam-cover gaskets for me do you? I'll make you all a cup of tea!! Cheers guys thanks for the welcome. I hope to do my gaskets this week-end weather permitting. I've read that Vectra alloy ones can be used - is this so and is it reccomended? had two new tyres (£52.00 each fitted and balanced - Admirals) fitted today coz they were both really bald in the centre (What has happened hear me thinks?) When the car was on the four post jack, I had a little look whilst the tyre guy did his thing - rear springs both snapped about and inch up from the bottom. How much do these cost? Any Ideas. Is it a big job?
Cheers ;)
Ian (SmiffyMan)
-
Hello & Welcome :y
-
[smiley=vrolijk_26.gif] Hiya! [smiley=vrolijk_26.gif]
-
Hi and welcome
-
Hi Ian and welcome to OOF. :)
-
Hi and welcome to the forum
-
Hi and welcome to the Forum :y
-
Hi and welcome to OOF.
-
Hello & welcome :y