Omega Owners Forum
Chat Area => General Discussion Area => Topic started by: hotel21 on 29 August 2007, 20:04:36
-
If the weather is good on the Saturday, I was rather hoping take advantage of the presence of the experts and advice on hand and to do the belt/tensioners/water pump on mine, alongwith sorting the vacuum/multirams. Was sorting out tools required, etc, today and it appears that I cannot lay my hands on the 30mm spanner or the required Torx to turn the crank.
Would it be too much of an imposition for someone to have them in the boot of their car, perhaps? I have the timing kit from, I think, JayW and will return it to him thereafter as well as a goodly assortment of tools.
Will pay handsomely in edibles (haggis, square sausage, Irn Bru, Tennants, malt etc) to those requiring... :y
ta
-
Don't have the said tools, but I'll take you up on the latter offer in any case, the usual :y, forgot to get my order in, and I am sure they'll be space in oor tent if yer stuck, or have'nt had any offers yet. :y
-
If the weather is good on the Saturday, I was rather hoping take advantage of the presence of the experts and advice on hand and to do the belt/tensioners/water pump on mine, alongwith sorting the vacuum/multirams. Was sorting out tools required, etc, today and it appears that I cannot lay my hands on the 30mm spanner or the required Torx to turn the crank.
Would it be too much of an imposition for someone to have them in the boot of their car, perhaps? I have the timing kit from, I think, JayW and will return it to him thereafter as well as a goodly assortment of tools.
Will pay handsomely in edibles (haggis, square sausage, Irn Bru, Tennants, malt etc) to those requiring... :y
ta
AFTER the cam belt is done. Broocie :o
-
I can post you my 30m spanner :)
-
Can throw my torx rail in the car no prob Brucie, afraid my 30mm ringer ain't deep enough to get the adjusters as I found out while doing mine (borrowed a mates)
-
No problem 30mm ring lives in the boot anyway & will be there if you need it :y
-
Don't have the said tools, but I'll take you up on the latter offer in any case, the usual :y, forgot to get my order in, and I am sure they'll be space in oor tent if yer stuck, or have'nt had any offers yet. :y
No probs Mick. I'll get a couple of slabs in for you. :y
-
If the weather is good on the Saturday, I was rather hoping take advantage of the presence of the experts and advice on hand and to do the belt/tensioners/water pump on mine, alongwith sorting the vacuum/multirams. Was sorting out tools required, etc, today and it appears that I cannot lay my hands on the 30mm spanner or the required Torx to turn the crank.
Would it be too much of an imposition for someone to have them in the boot of their car, perhaps? I have the timing kit from, I think, JayW and will return it to him thereafter as well as a goodly assortment of tools.
Will pay handsomely in edibles (haggis, square sausage, Irn Bru, Tennants, malt etc) to those requiring... :y
ta
AFTER the cam belt is done. Broocie :o
::)
;D
-
I can post you my 30m spanner :)
Thanks James. You could always drop down and hand it over, if you fancy a dram or two....
-
Can throw my torx rail in the car no prob Brucie, afraid my 30mm ringer ain't deep enough to get the adjusters as I found out while doing mine (borrowed a mates)
cheers! :y
-
No problem 30mm ring lives in the boot anyway & will be there if you need it :y
Thanks! :y
-
Square Sausage :-? or should i not ask :-X
-
Square Sausage :-? or should i not ask :-X
Lorne or square sausage (http://images.google.co.uk/imgres?imgurl=http://www.wellhungandtender.co.uk/acatalog/lorne.jpg&imgrefurl=http://www.wellhungandtender.co.uk/acatalog/Lorne_Sausage.html&h=225&w=300&sz=47&hl=en&start=1&tbnid=qnnlPd6psHYimM:&tbnh=87&tbnw=116&prev=/images%3Fq%3Dlorne%2Bsausage%26gbv%3D2%26svnum%3D10%26hl%3Den%26sa%3DG)
-
Square Sausage :-? or should i not ask :-X
Lorne or square sausage (http://images.google.co.uk/imgres?imgurl=http://www.wellhungandtender.co.uk/acatalog/lorne.jpg&imgrefurl=http://www.wellhungandtender.co.uk/acatalog/Lorne_Sausage.html&h=225&w=300&sz=47&hl=en&start=1&tbnid=qnnlPd6psHYimM:&tbnh=87&tbnw=116&prev=/images%3Fq%3Dlorne%2Bsausage%26gbv%3D2%26svnum%3D10%26hl%3Den%26sa%3DG)
Lovely stuff ain't had any for years, always served on a full brecky North of the Border.
-
I guess I don't need to bring 30mm spanner or E20 1/2" drive torx then?
-
Oh :-/
-
Always used to love going over to see my mate with a Scottish missus - square sausage sarnies :y
-
I guess I don't need to bring 30mm spanner or E20 1/2" drive torx then?
go on, you know you want to really......
-
Always used to love going over to see my mate with a Scottish missus - square sausage sarnies :y
Brill on a roll in the morning with a splash of HP....
-
I will be bringing the full kit so no problems there
-
Always used to love going over to see my mate with a Scottish missus - square sausage sarnies :y
Brill on a roll in the morning with a splash of HP....
Talking of which, I'll be bring a reasonable size bottle of HP, and of Heinz Ketchup. Who's bringing a BBQ (not chance I can fit mine in the car)...
-
I will be bringing the full kit so no problems there
I defo don't need to bring mine then!
Don't suppose you'll have a different sort of lock kit by then? :P
-
I can post you my 30m spanner :)
Oooo b*gger, I forgot you are going to be local, I was thinking you'd be in fife!
PM me your mobile number again :)
-
I can post you my 30m spanner :)
Oooo b*gger, I forgot you are going to be local, I was thinking you'd be in fife!
PM me your mobile number again :)
Sounds like Mr DTM will have his, so probably not required now James :y