Omega Owners Forum

Newbie Area => Newbie Welcome Area => Topic started by: tango on 28 September 2009, 18:26:15

Title: hello newbie breaking 2.6 v6 elite
Post by: tango on 28 September 2009, 18:26:15
 :D :D :D :D :D :D :D :D :D :D :D :D :Dhi and hello to all
i have just joined this forum
basically i have been an omega owner for the past 10 years
i am currently driving 2.6 v6 elite estate
the reason for me to join the forum is
i have been looking around for bits and found that there good advice here
i am however currently wanting to break a 2.6 v6 elite estate (not mine my wifes)
this was a good working car before someone went into the back of her
its had good wack in the back most parts are still up for grabs
so please do let me know
i also have some knowledge of repairing these as i have had 2litre engine wich snapped itstiming belt and sorted it out myself :) :) :) :) :) :) :) :) :) :) :)
Title: Re: hello newbie breaking 2.6 v6 elite
Post by: Stevie-blunder on 28 September 2009, 18:34:57
Hi Tango, welcome to OOF  :y
Any advice you need, post it in the general section, someone will help  :y
Title: Re: hello newbie breaking 2.6 v6 elite
Post by: Lizzie_Zoom on 28 September 2009, 18:59:48
Hello Tango and a very warm welcome to you! :y
Title: Re: hello newbie breaking 2.6 v6 elite
Post by: The Red Baron on 28 September 2009, 19:08:36
Quote
:D :D :D :D :D :D :D :D :D :D :D :D :Dhi and hello to all
i have just joined this forum
basically i have been an omega owner for the past 10 years
i am currently driving 2.6 v6 elite estate
the reason for me to join the forum is
i have been looking around for bits and found that there good advice here
i am however currently wanting to break a 2.6 v6 elite estate (not mine my wifes)
this was a good working car before someone went into the back of her
its had good wack in the back most parts are still up for grabs
so please do let me know
i also have some knowledge of repairing these as i have had 2litre engine wich snapped itstiming belt and sorted it out myself :) :) :) :) :) :) :) :) :) :) :)
you`ve been tango`d ;D welcome to the forum mate. :y
Title: Re: hello newbie breaking 2.6 v6 elite
Post by: Welung666 on 28 September 2009, 19:12:26
Welcome to OOF Tango :y
Title: Re: hello newbie breaking 2.6 v6 elite
Post by: waspy on 28 September 2009, 19:26:49
Hey. Welcome :) :y

You need 250 posts to advertize parts or breaking ;)
Title: Re: hello newbie breaking 2.6 v6 elite
Post by: Entwood on 28 September 2009, 20:13:30
"Hello" and Welcome :)
Title: Re: hello newbie breaking 2.6 v6 elite
Post by: RobG on 28 September 2009, 21:00:11
Hi and welcome to the forum :y
Title: Re: hello newbie breaking 2.6 v6 elite
Post by: PhilRich on 28 September 2009, 22:24:36
Hi Tango, & welcome  :y
Title: Re: hello newbie breaking 2.6 v6 elite
Post by: Dishevelled Den on 28 September 2009, 22:32:26
Welcome along T :y :y
Title: Re: hello newbie breaking 2.6 v6 elite
Post by: Elite Pete on 28 September 2009, 22:40:11
Hi and welcome :y
Title: Re: hello newbie breaking 2.6 v6 elite
Post by: Mr Skrunts on 28 September 2009, 23:00:56
Hi, welcome to the forum.  :y
Title: Re: hello newbie breaking 2.6 v6 elite
Post by: dbug on 28 September 2009, 23:36:23
Welcome to OOF mate :y
Title: Re: hello newbie breaking 2.6 v6 elite
Post by: Elitenut on 29 September 2009, 02:27:12
Hello and welcome to the Forum. :y :y
Title: Re: hello newbie breaking 2.6 v6 elite
Post by: Ghost on 29 September 2009, 08:11:40
Hello and Welcome
Title: Re: hello newbie breaking 2.6 v6 elite
Post by: sandune on 29 September 2009, 08:35:57
Hi welcome
Title: Re: hello newbie breaking 2.6 v6 elite
Post by: Rin-Mega-B on 29 September 2009, 16:08:55
Hello warm welcome OOF
Title: Re: hello newbie breaking 2.6 v6 elite
Post by: Cliffo B on 29 September 2009, 23:39:39
Hello,welcome to the Forum :y
Title: Re: hello newbie breaking 2.6 v6 elite
Post by: p j morgan on 30 September 2009, 01:24:17
welcome to oof mate :y
Title: Re: hello newbie breaking 2.6 v6 elite
Post by: zirk on 04 October 2009, 13:23:36
Hello and welcome  :y