Omega Owners Forum
Newbie Area => Newbie Welcome Area => Topic started by: weasel on 29 June 2010, 18:17:12
-
Yet another hello, Iam paul, had an omega for 7 months now and love it, its is a 1999 3.0 MV6 manual with
- Full stainless exhaust from cats back
- 17" astra GSi snow flakes
- Lowered 60mm all round
- Courtenay Sport 5.6kg flywheel
- Magnecor leads and Bosch super 4 plugs
- Welded 4.22 ratio diff ( HIGHLY RECOMMENDED)
- MOMO race steering wheel
- Monaro style Angel eye headlights (not fitted in picture)
- de-badged/mesh grille
Soon to have modified inlet manifold, mantzel style plenum and Senator rear sub-frame bushes when i get round to fitting them
The car was primarily bought for drifting, but i love it so much that its used as my daily driver too!
(http://i810.photobucket.com/albums/zz30/omegaMv6_photos/omega2.jpg)
-
Hello Paul and a warm welcome to you! :y
Love your car! 8-) 8-) 8-)
-
Hi & Welcome to the OOF, very nice car too :y
-
Hello & Welcome :y
-
welcome to the forum paul. nice motor. :y
-
Welcome to the forum Paul. If the Senator bushes are the same as the Carlton, don`t fit them. They will work their way out
-
Welcome !! :y :y
-
Hiya welcome , nice car :y
-
Welcome to OOF mate :y
-
Welcome along Paul :y :y
-
Hi Paul and welcome to the forum :)
-
If the Senator bushes are the same as the Carlton, don`t fit them. They will work their way out
I dont know if they are the same, maybe you could shed some light, basically exactly the same as omega just completely solid rubber r
whereas the omega ones have gaps?
Is this a common thing then? Thanks for the advice
-
Ola! welcome to the forum :y
-
"Hello" and Welcome :)
-
Hello,welcome to the Forum :y
-
Welcome bud! :y
-
Hi, welcome to the forum. :y
-
Hello and Welcome to the forum :y
-
Welcome to you.