Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: paul.c on 29 August 2006, 21:51:05
-
last week i fitted a second hand mid from eb*y £52.00 pretty good compaired with £420.00 quoted from vxhall dealer. now the problem is it needs reset to suit my car. at present its reading a range of 400 miles when the petrol gauge is in the red. anyway hears the interesting bit im a postman (big deal says you) yea but post vehicles get fixed in a p.o. garage. and now they have vxhalls and they also have tech2s and my frendly mechanic best mate buddy chum will use it on my car for a bar of chocolate only thing is i dont know how well trained up they are on it . so is their anyone who can give me a clue as to what to look for or how the reseting is done...ta
-
your replacement MID has most likley come from a 2.0 and hence the wrong settings displayed.
TheBoy is out Tech2 expert, he will be along in mo....
-
Plug in and start Tech2
Press enter at Welcome graphic.
Select Diagnose
Select year
Select Omega-B
Select Infotainment
Select Multi Info Display
Turn on ignition (not engine) when prompted
Press Confirm soft button when its communicated
Select Program
The next steps are a little vague but basically it should prompt for a Code Index.
IIRC, its 018 for v6 auto or 017 for v6 manual, but I'd have to double check...
-
christ that was bl**dy quick well done im impressed thank you very much [smiley=thumbsup.gif]
-
As I say, I'd need to double check those are correct, but I guessed 017 on Tunnie's manual Elite and 018 on Auto Project TB1 and they both seem fairly close. There is also a calibration setting for both range and consumption - this is where you fine tune both to your exactly car, though every one I've ever seen (except my MV6 coz I did it properly) is set as default...
-
As I say, I'd need to double check those are correct, but I guessed 017 on Tunnie's manual Elite and 018 on Auto Project TB1 and they both seem fairly close. There is also a calibration setting for both range and consumption - this is where you fine tune both to your exactly car, though every one I've ever seen (except my MV6 coz I did it properly) is set as default...
I have always found my consumption on the MID very accurate, i reset the consumption and drove for a tank full and compared the MID to working it out on paper.
Found it to be pratically the same, just 0.5 mpg out....
-
Ha! The MV6 is 0.1mpg out over 2 tankfuls.... :D
-
Ha! The MV6 is 0.1mpg out over 2 tankfuls.... :D
:( : >:(
-
Now I know what those strange numbers mean on my MID if I push the two buttons on the right stalk together. Its amazing the information you can get without even posting. There are so many push and hold buttons and switches on an Omega to set up or reset systems,shall we set up a definitive place we could add anything we find, especially those like me who have no handbook, pass etc.
-
Now I know what those strange numbers mean on my MID if I push the two buttons on the right stalk together...
I seem to be missing something - so what do these numbers mean then? I have '24060' on mine, not a clue what it is... Definitely not the mileage (I wish..)
-
Here's a bit more info.
http://www.omegaowners.com/forum/YaBB.pl?num=1156974172
-
Thanks Hillper, you seem to know everything... ;)
-
the 5 digit number is the number of pulses per km
-
Ha! The MV6 is 0.1mpg out over 2 tankfuls.... :D
...and you've got a TechII....... ;D