Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: johnny.dee on 22 September 2006, 21:07:34
-
Now the cool evenings are drawing in, I thought I might try correct a little fault with my heating and vent system.
The heating and cooling work fine, the problem is I cant seem to get it directed into the footwells no matter what what I set both dials to.
Haynes seem to say I have to have the centre console apart, (which is the reason I havent bothered before) and it is vacuam controlled. Any ideas lads?
-
More than likely one of the vacuum pipes in the engine bay
-
Vac feed pipe to the heater system from the engine bay is ok is it......can you hear a hiss at all when you turn the direction dial.
Got the cam locking kit back by the way...thanks!
-
checked all the vac pipes and heater pipes when I changed the oil cooler a couple of weeks ago, all ok.
No hiss has been heard.
-
checked all the vac pipes and heater pipes when I changed the oil cooler a couple of weeks ago, all ok.
No hiss has been heard.
Where it passes through bulkhead ok?
-
checked all the vac pipes and heater pipes when I changed the oil cooler a couple of weeks ago, all ok.
No hiss has been heard.
Where it passes through bulkhead ok?
yes all ok. I am still able to divert the air flow from screen to mid level vents,
Haynes say I have to remove the aircon gas before removing the control panel for a look at the vac pipes there, is this correct?
-
No its not correct....you can simply pop the panel out .....and then there is a rubber assembly with the vac pipes in it on the back of the direction switch.