Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: JamesV6CDX on 13 October 2006, 12:49:50

Title: cambelt help - urgent!
Post by: JamesV6CDX on 13 October 2006, 12:49:50
Hi Guys

Got a V6 Elite outside and I'm half way through changing the timing belt kit (yes with the right tool)  ;)

However, I have forgotton the torque values - and I've lost my DVD :(

I can't find them on Mark's torque thread either - Please can someone post up the torque values for the tensioner, and the idler rollers in particular.

Cheers
James
Title: Re: cambelt help - urgent!
Post by: RossPhim on 13 October 2006, 13:04:31
Right james this is from the book of lies, okay.

timing belt lower guide pulley bolt 40Nm.

timing belt tensioner pulley/upper guide pulley assembly
Backplate to cylinder head bolts 40Nm
Tensioner pulley Nut 20Nm
Guide pulley bolt 40 Nm
Hope this helps!
Title: Re: cambelt help - urgent!
Post by: RossPhim on 13 October 2006, 13:07:41
And
Timing belt cover bolts:
Outer cover 8Nm
Rear cover
  M6 Bolts  8Nm
  M8 threaded stud 10Nm

I think thats your lot.
Give us a shout if you need more.
Title: Re: cambelt help - urgent!
Post by: Allenm on 13 October 2006, 13:09:24
Crank pully               20 Nm
 
Water pump pully      Stage 1 - 8 Nm
                              Stage 2  - angle tighten a further 30deg
                              Stage 3 -  angle tighten a further 30deg
 
Power steering pully  Stage 1 - 20 Nm
                              Stage 2  - angle tighten a further 30deg
                              Stage 3 -  angle tighten a further 15deg
Title: Re: cambelt help - urgent!
Post by: Gwilym on 13 October 2006, 13:13:34
Quote
Hi Guys

Got a V6 Elite outside and I'm half way through changing the timing belt kit (yes with the right tool)  ;)


You are filling me with confidence :o
Title: Re: cambelt help - urgent!
Post by: Gwilym on 13 October 2006, 13:15:05
Quote

However, I have forgotton the torque values - and I've lost my DVD :(


Cheers
James

But it is going again  ;D