Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: slowlysafelysurely on 03 December 2006, 21:05:11
-
Not sure if thats what you call it! but the lever on my 3.0 has a lot of movement when in any position. In other words it goes in to 'gear' fine, drives fine, but if for example it is in drive I can move the lever back and forward at least half and inch.
Any ideas?
Cheers
-
Spunds slightly excessive, there should be some movement.
Loo nder thecar and at the side of thebox you should see a linkage with a bolt through it, check its tight.
-
cheers, will do, when it finally stops raining!!!!!