Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: Essex_Andy on 28 January 2007, 20:07:58
-
As some of you know my omega sprang a sizeable coolant leak on the way to work yesterday morning.
Now I have ordered a HBV as that seems the likely cause.
Now with the plenum off and with the gaskets, cam seals a full set of 3.0 cams, cam locking kit in my conservatory shall I go the whole hog?
New hbv, 3.0 cams, 3.0 throttle body, new cambelt kit, new aux belt, new water pump?
If I do this is there anyone willing to help me? And anyone with a vauxhall trade card who can help me buy the belt kit and water pump?
Thanks
-
Do it! You know you wan't to ;)
I'd help but 1 - I'm a bit far away and more importantly 2 - I havn't got a clue what to do ;D
-
Yes...do it.
By the way...the 3.0 and 2.5 throttle bodies are the same size.....
-
Yes...do it.
By the way...the 3.0 and 2.5 throttle bodies are the same size.....
I've taken my time a fully cleaned the throttle body that came off the 3.0.....butterfly edges...breather routes etc
Just noticed I dont have the O-rings for the rocker cover bolts and payday on the 31st so the cams may have to wait for a few weeks
-
I can help with TC for anything that can be posted... unless you're down in the SE and can collect?
-
I can help with TC for anything that can be posted... unless you're down in the SE and can collect?
I can collect fella.....I live close to the dreaded Lakeside Shopping Centre
-
I can help with TC for anything that can be posted... unless you're down in the SE and can collect?
I can collect fella.....I live close to the dreaded Lakeside Shopping Centre
My work gets me near three Vx dealers when I can buy TC bits, these are Sudbury in Suffolk, Brent Cross/Staples Corner in North London, and Gillingham/Rainham in Kent... are you near any of those?
-
If you're close to suffolk/essex border then there's a Vx dealer in Chelmsford
I work near holloway road in London N7