Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Elite Pete on 20 March 2007, 20:47:39

Title: Multirams not working
Post by: Elite Pete on 20 March 2007, 20:47:39

Whilst tinkering today I thought I would do the Blip test to see if the multirams are working and guess what, they dont work so what is the procedure to find the fault.

Ta in advance :y

Title: Re: Multirams not working
Post by: irratic on 20 March 2007, 20:49:21

I HAD THIS THE OTHER DAY MATE.. CHECK YOU HAVE A VACUUM UP TO THE SOLENOID ,PRIOR TO THE MULTIRAM... ARE BOTH OF THEM NOT WORKING????

Title: Re: Multirams not working
Post by: Elite Pete on 20 March 2007, 20:58:10

Yep both of them are doing nothing :(

Title: Re: Multirams not working
Post by: irratic on 20 March 2007, 21:01:42

check you have a vacuum on the front one(solenoid behind the two air ducts... if you do take the solenoid off and blow it out.. mine just had some s**t in it. put it back on revved it right up and they both kicked in working..

Title: Re: Multirams not working
Post by: The Barge Captain on 21 March 2007, 15:28:36

Have a look at Mark DTM's poll in general chat about multiram vacuum tank.  Fixed mine.

Title: Re: Multirams not working
Post by: The Barge Captain on 21 March 2007, 21:52:30

Sorry.  Just noticed that it is no longer there.

Title: Re: Multirams not working
Post by: Marks DTM Calib on 21 March 2007, 22:02:51

It a few pages down...not a sticky any more but, not deleted....