Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Paulus on 13 April 2007, 10:38:22

Title: Silly Question
Post by: Paulus on 13 April 2007, 10:38:22

Where does the Crank Sensor plug in to the main loom on a 3.0 V6? I have tried to trace the wire, but it disappear in to an inaccessable area behind the engine.

Also, what's your advice on fitting a second-hand, but known to be working, Crank Sensor?

Paul.

Title: Re: Silly Question
Post by: theolodian on 13 April 2007, 10:40:57

It's at the back of the plenum, NS.  Easiest to take the scuttle off when you replace it, but you can reach it without taking anything off.

Title: Re: Silly Question
Post by: Marks DTM Calib on 13 April 2007, 15:35:48

I wouldn't fit second hand unless it was still pretty new and had a known history.....particularly given how much some sellers charge for second hand sensors!