Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Bridget on 30 April 2007, 18:52:23

Title: Horn connections - was disabled drivers vehicle.
Post by: Bridget on 30 April 2007, 18:52:23

Desperately looking for help with my horn connections! My '98 Reflection was modified for a disabled driver using the Guido SimplexEN/907 electronic gas ring and mechanical brake lever. I have managed to remove all the parts but can't get to the bottom of the wiring for the horn. I have one wire left from the old brake lever (which operated the horn) but I can't figure out where it should be connected at the steering column. Can anyone help, please?

Title: Re: Horn connections - was disabled drivers vehicl
Post by: Marks DTM Calib on 30 April 2007, 19:07:23

It should connect to the rear (column side) of the steering wheel squib (circular plastic assmebly)....to pin 2 (Brown/white wire)

Title: Re: Horn connections - was disabled drivers vehicl
Post by: DaveL on 30 April 2007, 19:50:24

Well Marks DTM Calib seems to have answered your question Bridget, all i have to say is welcome to the forum. :y
 8-)
DaveL

Title: Re: Horn connections - was disabled drivers vehicl
Post by: Bridget on 30 April 2007, 20:59:08

Thanks, Guys! Will try tapping onto Brown/White at connector before making permanent. Hope to get a chance to work on it tomorow night. Will post results when done.
Thanks for the help.....and the Welcome! Both are appreciated. :)

Title: Re: Horn connections - was disabled drivers vehicl
Post by: Bridget on 01 May 2007, 19:21:40

 :y A big thumbs up to you guys! I have done the work and now my horn does whot it's supposed to!!
Many thanks!