Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: NML on 13 May 2007, 16:05:46
-
What eninge would be in my Omega?
I know 2ltr 16v ecotec cav's are X20xev but what are the 2ltr Omega's
-
hi according to my autodata cd the 2.0 16 v from 96 - 00 are all x20xev 136bhp @ 5400 rpm or 100kw , as are the 94-96
hope this helps
-
X20XEV if 16v, or 20SE if 8v (rare)
-
X20XEV if 16v, or 20SE if 8v (rare)
very rare 8valvers :o
-
Cause I'm thinking about getting another engine to be reconditioned does this mean I can get a X20XEV from a cavalier and it'll fit.
-
in my opinion i think your best option is to source a lump from an omega as the cav is transverse and would require all mounts and pulley mounts to be changed also the original block would require extensive thread cleaning where the mounts would go, the sump may not match and .... i dont think it would be worth your while ,
sorry,just my opinion ,others may know different
cheers
-
Yeh, sump and flywheel are different as are aux mounts and timing cover etc...
I would try to source a post 98 2.0 from an Omega....these have some extra refinements including balancer shafts which are not on the earlier units.
-
X20XEV if 16v, or 20SE if 8v (rare)
very rare 8valvers :o
..if the 8-valvers are the same as found on the Astra OHC engines, then this is a somewhat un-sophisticated but extremely reliable power unit.... and dead easy to work on or rebuild. :y