Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: magnaman on 23 June 2007, 15:11:46

Title: not pulling
Post by: magnaman on 23 June 2007, 15:11:46
hi all can you help when i pull off in car it feels like its holding back also when im driving normaly it pulls like there might be a break in ht lead is this possible where do i start help????
Title: Re:  not pulling
Post by: VX1 on 23 June 2007, 15:15:22
Not to sure for the 2.5 v6 but it could be your HT leads breaking down. There is a way you can check this by way of take each lead off in turn put a spark plug in and crank the engine over and check the spark.

Weak: change laeads
Strong: investigate elsewhere.

I am sure others on here may be able to give more advise on this but I would check the leads first.
Title: Re:  not pulling
Post by: magnaman on 23 June 2007, 15:17:06
heers for that do you have any idea how much leads are or cheepest place
Title: Re:  not pulling
Post by: TheBoy on 23 June 2007, 15:36:58
Does EML come on when it happens? Does EML come on with ignition?

If so, read the codes (can be done with paperclip if 2.0/2.5/3.0).  If not, check HT side - plugs/leads/DIS, as well as oil in plug wells.

If any of above doesn't make sense, let us know :)
Title: Re:  not pulling
Post by: magnaman on 23 June 2007, 15:41:03
i get no eml or any codes i think the leads are shot
Title: Re:  not pulling
Post by: TheBoy on 23 June 2007, 16:53:16
Quote
i get no eml or any codes i think the leads are shot
Yes, it may well be HT related then.

However, before spending money, just check for air leaks as well...
Title: Re:  not pulling
Post by: magnaman on 23 June 2007, 21:04:09
you tell me how to check for air leaks cheers
Title: Re:  not pulling
Post by: Dazzler on 23 June 2007, 21:50:00
The easy way to check for airleaks is with a can of carb cleaner. With engine running at normal idle(engine warm) spray the carb cleaner around all the parts that could leak air, if leak dectected the engine idle will change......wait for revs to settle and spray again in that area to pin point the leak ;)
Title: Re:  not pulling
Post by: magnaman on 24 June 2007, 11:31:13
cheers is it wise to try redex or will it harm
Title: Re:  not pulling
Post by: TheBoy on 24 June 2007, 12:00:49
Personally, I use the Forte Injection cleaner - about a fiver from ebay....