Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: Owen on 26 June 2007, 14:04:47
-
Was out this morning and when coming off the A5 and coming to a stop at athe junction 'Automatic gearbox' appeared on my display.
The car seemed to be stuck in 1 gear! :o Got home, turned the car off and panicked! ;D
On starting the car up again the autobox seemed to work fine ::)
Any ideas, should I be worried? ;D
-
Do you get funny flashing lights on the selector?
-
NO mate, select lights were as they should be
-
How many miles has the gearbox done?
-
Oil & Filter change?
-
For some reason, the box detected a fault, and put it in limp mode (hence the MID msg).
Unfortuantely, it needs a good code reader to read gearbox to find out what it stored.
Whatever, it may be worth planning a fluid and filter change on the box (£60ish if you do it yourself).
-
Been through any deep water? Selector wet!!!
http://www.omegaowners.com/forum/YaBB.pl?num=1182802365/0
-
How many miles has the gearbox done?
Just the once which was today!
-
For some reason, the box detected a fault, and put it in limp mode (hence the MID msg).
Unfortuantely, it needs a good code reader to read gearbox to find out what it stored.
Whatever, it may be worth planning a fluid and filter change on the box (£60ish if you do it yourself).
Isnt limp mode just 3 and 4 ?
But agree you need to get the g/b ecu read for stored codes :y
A cheapo tech2 might do it.
-
A cheapo tech2 might do it.
With the standard supplied software, the cheapo doesn't read autoboxes...
-
A cheapo tech2 might do it.
With the standard supplied software, the cheapo doesn't read autoboxes...
It used to on my 2.2 until vx changed the g/b ecu and updated to ver 10.....now it carnt :(
Why i said might..... :y
-
A cheapo tech2 might do it.
With the standard supplied software, the cheapo doesn't read autoboxes...
It used to on my 2.2 until vx changed the g/b ecu and updated to ver 10.....now it carnt :(
Why i said might..... :y
Ah right, I stand corrected :y
-
A cheapo tech2 might do it.
With the standard supplied software, the cheapo doesn't read autoboxes...
It used to on my 2.2 until vx changed the g/b ecu and updated to ver 10.....now it carnt :(
Why i said might..... :y
Ah right, I stand corrected :y
Ok, all of that means absoloutly nowt to me! ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D