Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: ffcgary1 on 29 June 2007, 00:16:37

Title: cruise c
Post by: ffcgary1 on 29 June 2007, 00:16:37

I have bought a 3.0v6 elite on a m plate for breaking which has cruise control,if i wished to fit this system to my 97 tourer,which parts do i remove to make this poss if it is poss that is,and how does it work,mech or electrical?? ::)

Title: Re: cruise c
Post by: jonny2112 on 29 June 2007, 00:35:49

I've just fitted cc to my V6 and although fiddly, is a piece of cake, particularly as you have the donor car.
You'll need the stalk, the actuator module from under the bonnet and both the brake and clutch switches if a manual. The switches can be awkward to fit due to restricted access above the pedals. There is an excellent how2 in the maintenance area which will tell you all you need to know, and the electrics should be in place. Just take your time and be careful when removing and reinstalling the switches.

HTH and good luck.

By the way is the Elite a saloon, and does it still have the rear blind?

Title: Re: cruise c
Post by: ffcgary1 on 29 June 2007, 10:04:35

Thanks for that mate, i will give it a go ,yes the car is a manuel box  :) :yand it does have the rear blind on a dark grey parcel shelf. the blind is still working ok.Make me an offer and see what we can do.