Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: Owen on 29 June 2007, 16:03:00
-
SO where, found it unconnected round the back of engin, exactly where you see it in the pic
Any ideas?
(http://i204.photobucket.com/albums/bb53/trooper30/2.jpg)
(http://i204.photobucket.com/albums/bb53/trooper30/3.jpg)
(http://i204.photobucket.com/albums/bb53/trooper30/1.jpg)
-
Its a vac pipe and connects to the input of the vac solenoid for the rear multiram which is mounted on the back of the plenum.
-
Rear of plenum and get some kitchen roll in them holes before you drop something down there!!!!!!
-
Right gotcha! Cheers :y
Cover pots! Yup wise move!
You answered another question there, the multiram, wondered where it was, cheers!
But what does it do? And could this have been a factor in my stalling problem?
-
Multiram is at the back of the plenum on the passenger side. Look at my 'really useful pics' in the maintenace section. The third pic, as you l;ook at the engine back, just to the left of the breather pipes there is a black little tube horizonatlly. THAT IS WHERE THAT HOOKS IN.
-
Right all done!
Cleaned all the bits and bobs that are in the forum guides, cheers fellas.
Stalling ceased! (at least for the min) :)
Consumption gone up to 25.6 YEY :)