Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: Craig_R on 03 July 2007, 09:23:48
-
Does anyone have some photos of the front top mounts, I have to replace mine And I would not mind seeing some picys of them before i try and figure out how to remove mine, and find out what part has failed. I am kind of working in the Dark here As I have never done anything like this before :-[
Craig
-
(http://file:///E:/Documents%20and%20Settings/Pete/Desktop/Image156.jpg)
(http://file:///E:/Documents%20and%20Settings/Pete/Desktop/Image155.jpg)
LOL, we don't have access to your E drive ;)
-
(http://file:///E:/Documents%20and%20Settings/Pete/Desktop/Image156.jpg)
(http://file:///E:/Documents%20and%20Settings/Pete/Desktop/Image155.jpg)
LOL, we don't have access to your E drive ;)
god loves a trier though :y
-
Hi This link should show you what you need well here`s hoping.
http://photos.yahoo.com/pete1666@btinternet.com.
-
Thanks Pete :y
If these are your Top Mounts could you take the Mounts to bits and photo them in parts for me PLEASE I just want to see how they go together so its easier for me when i replace mine
Thanks
Craig
-
Thanks Pete :y
If these are your Top Mounts could you take the Mounts to bits and photo them in parts for me PLEASE I just want to see how they go together so its easier for me when i replace mine
Thanks
Craig
Doesn't dismantling these from the car and subsequant re-installation also requires a reset of the geomtery and camber? Not sure if your aware of the potential add on jobs for this job - will stand corrected if talking a load of kak :-/
-
Thanks Pete :y
If these are your Top Mounts could you take the Mounts to bits and photo them in parts for me PLEASE I just want to see how they go together so its easier for me when i replace mine
Thanks
Craig
Doesn't dismantling these from the car and subsequant re-installation also requires a reset of the geomtery and camber? Not sure if your aware of the potential add on jobs for this job - will stand corrected if talking a load of kak :-/
That is no problem for him he lives near Wheelsinmotion
-
Thanks Pete :y
If these are your Top Mounts could you take the Mounts to bits and photo them in parts for me PLEASE I just want to see how they go together so its easier for me when i replace mine
Thanks
Craig
hi sorry cant take apart as i dont have spring compressor, and these are going on to
my car soon as the spring has broken on mine, but if get the other one off
sooner i will see if i can find a spring comp from a friend. Looking at it its just a matter
of stripping it down changing the top mount then re assembling.
When you put them back on the car, get new bottom bolts as they are stretch bolts.
Cheers Pete
-
Thanks Pete :y
If these are your Top Mounts could you take the Mounts to bits and photo them in parts for me PLEASE I just want to see how they go together so its easier for me when i replace mine
Thanks
Craig
hi sorry cant take apart as i dont have spring compressor, and these are going on to
my car soon as the spring has broken on mine, but if get the other one off
sooner i will see if i can find a spring comp from a friend. Looking at it its just a matter
of stripping it down changing the top mount then re assembling.
When you put them back on the car, get new bottom bolts as they are stretch bolts.
Cheers Pete
Also will need camber reset as well....
-
Thats Ok Pete :)
Am I going to need Spring Compressors to replace the top mounts ? After Chatting At the Tidworth Meet I did not think i was going to need them Am I wrong I dont fancy a face full of Spring when changing them
Craig
-
Thats Ok Pete :)
Am I going to need Spring Compressors to replace the top mounts ? After Chatting At the Tidworth Meet I did not think i was going to need them Am I wrong I dont fancy a face full of Spring when changing them
Craig
Its a while ago I changed my shocks, but seem to recall that spring sits against bearing, so yes, compressor required...