Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: JamesV6CDX on 05 July 2007, 16:16:29

Title: Clonk over bumps...
Post by: JamesV6CDX on 05 July 2007, 16:16:29

don't notice it much over large bumps, but over small ones, especially when going slow - clonk, clonk, clonk - sounds like the drivers side.

Droplink? Having said that, I've shaken it hard, and can't feel any play...

Title: Re: Clonk over bumps...
Post by: Craig_R on 05 July 2007, 16:30:01

Hope its not your Front top Mounts like I tracked mine down to being them  :'(

Title: Re: Clonk over bumps...
Post by: Weds on 05 July 2007, 16:31:28

Quote

don't notice it much over large bumps, but over small ones, especially when going slow - clonk, clonk, clonk - sounds like the drivers side.

Droplink? Having said that, I've shaken it hard, and can't feel any play...

You won't be able to move it by hand there under to much tension. Even when worn they hardly move.

Title: Re: Clonk over bumps...
Post by: pete1666 on 05 July 2007, 16:37:23

hi check the bottom of the front spring, i found mine snapped at the bottom of the spring, you
just never know?

Title: Re: Clonk over bumps...
Post by: TheBoy on 05 July 2007, 18:15:52

droplinks are cheap and easy enough - £25 should do both sides.  And do do both sides.

Title: Re: Clonk over bumps...
Post by: geoff on 05 July 2007, 22:27:45

i had the same problem changed both drop links now qiuet as a mouse,only cost £9 a side bargin to keep it right and only 20 - 30 minutes a side :y :y :y