Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: JamesV6CDX on 30 June 2007, 13:45:14

Title: Multirams not working :(
Post by: JamesV6CDX on 30 June 2007, 13:45:14

Probably why the Estate feels a bit flat - neither multirams appear to be working.

Vaccum's seem fine - what's up with it?

Title: Re: Multirams not working :(
Post by: Markie on 30 June 2007, 13:47:19

good question...im at the same stage today :(

back front or both...?

edit - ive just re read.... :-[

Title: Re: Multirams not working :(
Post by: JamesV6CDX on 30 June 2007, 13:48:46

Quote

good question...im at the same stage today :(

back front or both...?

edit - ive just re read.... :-[

Both :(

Title: Re: Multirams not working :(
Post by: Markie on 30 June 2007, 13:52:49

my thinking is its got to be piping ( either damaged or wrongly "plumbed in") if each vac tank is fine.....

At least thats thought process i am going through with mine....both are opening/ moving manually...

Presume youve had the Mrs rev its head off whilst watching..

After my imminent and thorough examination of all attached parts im stuck too  :(

Title: Re: Multirams not working :(
Post by: JamesV6CDX on 30 June 2007, 13:54:27

Quote

my thinking is its got to be piping ( either damaged or wrongly "plumbed in") if each vac tank is fine.....

At least thats thought process i am going through with mine....both are opening/ moving manually...

Presume youve had the Mrs rev its head off whilst watching..

After my imminent and thorough examination of all attached parts im stuck too  :(

I'm lucky enough to have spares I can swap out - but I can't be arsed in this weather.

Title: Re: Multirams not working :(
Post by: TheBoy on 30 June 2007, 19:54:36

Clarify 'vacs seem ok' - are the vac tank(s) holding a decent vac?

Title: Re: Multirams not working :(
Post by: Owen on 02 July 2007, 13:14:05

After reading this I just realised that mine dont work either? :(

Title: Re: Multirams not working :(
Post by: Markie on 02 July 2007, 13:16:19

Quote

After reading this I just realised that mine dont work either? :(

You do need to rev to 4000k plus to see front one working...

Title: Re: Multirams not working :(
Post by: Owen on 02 July 2007, 13:47:27

Yep, tried that, and nothing was moving at the front, checked front pipes, will have a look at the back when the rain stops!

Title: Re: Multirams not working :(
Post by: gnasha on 10 July 2007, 12:51:52

same here but only rear one not working all pipes seem fine any idea's

Title: Re: Multirams not working :(
Post by: spookyman60 on 10 July 2007, 13:02:12

the back one is open on idle then flips over at 3400 then closed until 4100+ but as for the ones not working mine did with a badly damaged pipe which was strange but i would check it then check the ecu as there controled through the ecu iirc