Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: megaomega123 on 20 July 2007, 17:57:22

Title: What I have now
Post by: megaomega123 on 20 July 2007, 17:57:22

After everything done, I now have no rear multiram and is idling at 1200rpm.

ICV cleaned, throttle body cleaned, checked all vac pipes and electrical connections.

What now??

Title: Re: What I have now
Post by: megaomega123 on 20 July 2007, 17:58:52

Could I have disturbed the throttle position sensor?
nah I doubt it actually

Title: Re: What I have now
Post by: JamesV6CDX on 20 July 2007, 18:01:43

Could do with seeing the car really... I still say air leak.

Title: Re: What I have now
Post by: megaomega123 on 20 July 2007, 18:04:26

I've done the breather box seals now. The thing I broke this time was.....  I managed to strip the thread for the breather box to plenum.

Is this the problem???  If so how do I fix it???

I really am an arse when it comes to fixing things  >:(

Title: Re: What I have now
Post by: TheBoy on 20 July 2007, 18:21:35

Quote

After everything done, I now have no rear multiram and is idling at 1200rpm.

ICV cleaned, throttle body cleaned, checked all vac pipes and electrical connections.

What now??

Why no rear multram?

RPM, that'll likely be an air leak.

Title: Re: What I have now
Post by: megaomega123 on 20 July 2007, 18:29:34

I don't know, I've checked everything twice  :'( :'(

Title: Re: What I have now
Post by: megaomega123 on 20 July 2007, 18:32:39

I have sprayed a bit of carb cleaner around the obvious areas and no sign of air leak.

Title: Re: What I have now
Post by: TheBoy on 20 July 2007, 18:34:53

Just double check you haven't got throttle cable too tight.

Title: Re: What I have now
Post by: megaomega123 on 20 July 2007, 20:52:35

Quote

Just double check you haven't got throttle cable too tight.

Did think that but too knackered to check it now. It didn't appear too tight, however the revs dropped lifted the blipper slightly. There seems to be definite slackness.

Just a thought.... the solenoid I removed to replace the rear multiram, came from the rhs of rad on the fan housing. What is this for and is not having it likely to cause the above symptoms?  

Title: Re: What I have now
Post by: TheBoy on 20 July 2007, 21:15:23

Other valve is SAI, shouldn't affect anything, unless 1 way valve in SIA is shot...

Thinking about it, did you put faulty valve on the SAI? If not, do so. Doesn't matter that it dont work.

Title: Re: What I have now
Post by: megaomega123 on 20 July 2007, 21:51:30

Quote

Other valve is SAI, shouldn't affect anything, unless 1 way valve in SIA is shot...

Thinking about it, did you put faulty valve on the SAI? If not, do so. Doesn't matter that it dont work.

I did put the faulty valve on to begin with but thought that may be the cause, so disconnected it. The same whichever way. I am at a complete loss now.