Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: maddy on 31 July 2007, 08:36:15

Title: new on old??
Post by: maddy on 31 July 2007, 08:36:15

hi dose any know if it is possible to fit the face lift front and rear bumpers to a 96 model?? or even better has anybody do it....cheers  :-?

Title: Re: new on old??
Post by: VXL V6 on 31 July 2007, 09:12:24

Not sure about the back but the front will cause a problem because the radiator grill is attached to it, you'd have to change the bonnet as well.

Title: Re: new on old??
Post by: Danny on 31 July 2007, 12:47:05

this is a 94 prefacelift omega with a facelifted front end

it has the MV6 front bumper but will take the standard one

http://www.omegaowners.com/forum/YaBB.pl?num=1175028431

Title: Re: new on old??
Post by: maddy on 31 July 2007, 16:56:36

cheers for that link will. hes made a really good job thats exsactly what im looking at doing? just got to find out how now any ideas??

Title: Re: new on old??
Post by: Danny on 31 July 2007, 17:05:35

send a pm to LJ707, its his car

Title: Re: new on old??
Post by: Jim on 31 July 2007, 17:13:11

I've done it too, it's a straight swap the only thing I had to do was buy new wheel arch liner's for the back as the old one's don't will the gap as it's a slightly wider bumper :y

Title: Re: new on old??
Post by: maddy on 31 July 2007, 17:31:07

hi jim. what was on your shopping list when you did converstion? i was thinkg i would need front rear bumper two wings, bonnet,lights. have i missed anything. any help would be great...cheers matt

Title: Re: new on old??
Post by: Danny on 31 July 2007, 19:11:53

the wheel arch liners for the back :y

what wheels do you have? prefacelift alloys look odd when surrounded with a facelift front end