Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: Smallfry on 02 August 2007, 19:37:11
-
Could someone out there with a 2.5 or 3.0 V6 measure the distance between the front of the front engine pulley, and the back of the multi ram flap thingy...................i.e, the gap between them.
Also, the distance from the front of the front pulley, to the FRONT of the multi ram assembly.
I am trying to work out haw much space I need to install it in my Triumph !
Many thanks.
-
Could someone out there with a 2.5 or 3.0 V6 measure the distance between the front of the front engine pulley, and the back of the multi ram flap thingy...................i.e, the gap between them.
Also, the distance from the front of the front pulley, to the FRONT of the multi ram assembly.
I am trying to work out how much space I need to install it in my Triumph !
Many thanks.
It's a bloody big engine for a motorbike ;D ;D ;D ;D ;D
-
Could someone out there with a 2.5 or 3.0 V6 measure the distance between the front of the front engine pulley, and the back of the multi ram flap thingy...................i.e, the gap between them.
Also, the distance from the front of the front pulley, to the FRONT of the multi ram assembly.
I am trying to work out how much space I need to install it in my Triumph !
Many thanks.
It's a bloody big engine for a motorbike ;D ;D ;D ;D ;D
;D ;D ;D :y
-
Pulley to rear of rams approx 2.5 " pulley to front of rams 9.5"...
DC