Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: alanfp on 25 August 2007, 13:00:50

Title: Transmission line pressure adjuster?
Post by: alanfp on 25 August 2007, 13:00:50

I have a "Rosmore GM transmission line pressure adjuster" fitted to my car with Scotchlocks.  It's a small aluminium box (8cmx8cmx4cm) screwed onto the bulkhead. I know that's what it is because that's what it says on the label!

Any idea what it does (and why it might have been added). I can't believe it's a genuine VX fitment.

Title: Re: Transmission line pressure adjuster?
Post by: Markjay on 25 August 2007, 23:50:45

This is what a bit of goggling unearthed:

http://www.otsparts.com/products.htm

-------------------------------------------------------------

OTS & Rosmore Ltd
TCC Adjuster
Negative Switched
Part # TCC-ADJ
The TCC Adjuster functions by altering the computer strategy that controls the TCC which yields the folowing advantages:

1. Cures shudder problems caused by slow application.
2. Reduces Clutch Slip
3. Reduces heat in the Converter Clutch.

Another advantage of the TCC Adjuster is it helps to ensure that the TCC is not brought in too early while under heavy acceleration.

The Unit is:
1. Quick and easy to install.
2. Low cost.
3. Designed to fit negative switched transmissions.
4. Easy to adjust.
5. Small size 51mm x73mm x25mm (d x w x h).

-------------------------------------------------------------

Title: Re: Transmission line pressure adjuster?
Post by: DaveL on 26 August 2007, 07:57:32

Quote

This is what a bit of goggling unearthed:

http://www.otsparts.com/products.htm

-------------------------------------------------------------

OTS & Rosmore Ltd
TCC Adjuster
Negative Switched
Part # TCC-ADJ
The TCC Adjuster functions by altering the computer strategy that controls the TCC which yields the folowing advantages:

1. Cures shudder problems caused by slow application.
2. Reduces Clutch Slip
3. Reduces heat in the Converter Clutch.

Another advantage of the TCC Adjuster is it helps to ensure that the TCC is not brought in too early while under heavy acceleration.

The Unit is:
1. Quick and easy to install.
2. Low cost.
3. Designed to fit negative switched transmissions.
4. Easy to adjust.
5. Small size 51mm x73mm x25mm (d x w x h).

-------------------------------------------------------------

Or of course the transmission could be maintained with good servicing!! But if this device works for you then fair enough. ;)

Title: Re: Transmission line pressure adjuster?
Post by: TheBoy on 26 August 2007, 10:56:04

Or decent firmware on the ECU ;)