Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: paul.c on 09 September 2007, 21:16:04

Title: coolant change
Post by: paul.c on 09 September 2007, 21:16:04

is it really necessary to take the hose at the heater matrix off cant you just flush the flipping thing out like NORMAL cars :)

Title: Re: coolant change
Post by: Dazzler on 09 September 2007, 21:34:19

It's always best to flush the matrix out direct as its another rad and so will flush alot better directly.

Title: Re: coolant change
Post by: Markjay on 09 September 2007, 23:24:31

...but if you do a few (e.g. 2-3) flushes while allowing the engine to warm-up and ensuring that the heater / climate are on full heat, then you should get to all corners of the cooling system....