Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: onthehill1 on 16 September 2007, 09:14:32

Title: Fault Codes 0335,0340
Post by: onthehill1 on 16 September 2007, 09:14:32

Morning all.
Just recently my omega has started getting a problem.
Starts from cold no problem and can drive any distance without restarting.
But when i restart and the engine is warm or hot (95) (operating temp i think) the eml light stays on and won't  go out. The car is then in limp mode.
Done a paper clip test and get codes 0335 and 0340.
May sound stupid but what now? Do i just replace the sensors or what?

Would be grateful for advice.
Chris. :y

Title: Re: Fault Codes 0335,0340
Post by: Markie on 16 September 2007, 09:17:07

try here...

http://www.omegaowners.com/forum/YaBB.pl?num=1160152415

Not really familiar with those codes - not sure if you have noted them correctly  - maybe check the codes again?

Title: Re: Fault Codes 0335,0340
Post by: TheBoy on 16 September 2007, 09:18:56

Change the cam sensor!!

Also worth double checking the cambelt timing is spot on (easy on 2.0/2.2 engines)

Title: Re: Fault Codes 0335,0340
Post by: onthehill1 on 16 September 2007, 09:29:19

Thanks for the advice.
Its getting near time for a cambelt change. I will get it all done at the same time i guess.
What do you think im looking at price wise for
Cambelt kit , Water pump and cam sensor to be done? £350 or more?
Thanks.

Title: Re: Fault Codes 0335,0340
Post by: Markie on 16 September 2007, 09:45:42

Quote

Thanks for the advice.
Its getting near time for a cambelt change. I will get it all done at the same time i guess.
What do you think im looking at price wise for
Cambelt kit , Water pump and cam sensor to be done? £350 or more?
Thanks.

water pump is only £20 odd on trade and should be done when cam belt is done - your in the area anyway although the pump is not belt driven.

make sure the cambelt is a kit and not just the belt - its the tensioner/rollers that normally fail.

We have an excellent DVD on here - send a pm to Robin Hood for details, after studing that dong the cambelt and water pump yourself is much more managable and you may just get change from £200.

Outwith this you may struggle to get a £350 quote for that work..

Title: Re: Fault Codes 0335,0340
Post by: Craig_R on 16 September 2007, 10:28:26

He has a 4 pot Robin Hoods DVD is a V6 engine.

I do have my 4 pot cambelt change online but i want to ask the mods about setting up some kind of paypal for it and place the video file on the OOF severs for download

Title: Re: Fault Codes 0335,0340
Post by: Markie on 16 September 2007, 11:21:34

Quote

He has a 4 pot Robin Hoods DVD is a V6 engine.

I do have my 4 pot cambelt change online but i want to ask the mods about setting up some kind of paypal for it and place the video file on the OOF severs for download

so he has -i need to start reading eoples profiles  ;D ;D concept being similar though prices slightly less..

Title: Re: Fault Codes 0335,0340
Post by: TheBoy on 16 September 2007, 14:55:14

Quote

He has a 4 pot Robin Hoods DVD is a V6 engine.

I do have my 4 pot cambelt change online but i want to ask the mods about setting up some kind of paypal for it and place the video file on the OOF severs for download

I'm sure it can be done.  We have facilities to host, just would need to tie up some procedures...