Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: keno on 20 September 2007, 21:02:33
-
Hi All,bit of a cheek really,i done own an omega but am working on one,came to me with a serious oil leak from the bell housing,definitly tramsmission fluid,took out box and replaced torque converter oil seal,put it back together and still pi**ing out,took it out again,thought i might have damaged seal putting it in,it was ok but i put in another new one,still leaking,any help????? please
-
Sorry, not my area of expertise. Try the search function under the logo at the top of the page. You will no doubt get a few ideas with the results. ;)
Good luck with the repair... :y
-
Is the leak coming from the torque converter seal? Or could it be coming from elsewhere? Mine was leaking from a pipe, but it ran done bellhousing...
-
It is coming from inside the bellhousing,but i dont think its from the seal but i couldnt see anywhere else inside that could leak,unless it has a fracture in the housing,but its not noisy and it still changes gear ok..
-
Hmm, not sure then, unless coming through one of those bolts that hold bellhousing on. Or leak in TC itself (unlikely)
-
Mine leak on the left side (passenger for your country) from a socket..But problem is whole socket needed to change not the gasket alone..Hope this helps..
-
This is coming from inside the bellhousing, :(,outside is dry,leaks when car is running only.