Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: gsxmax1 on 12 October 2007, 21:49:18

Title: fitting cruise to a manual MV6
Post by: gsxmax1 on 12 October 2007, 21:49:18
having got the relevant bits, from a 2.5 manual, from another site member i'm in the process of fitting cruise to a manual mv6. all going ok until time to fit the control box to the inner driver's wing.

currently, using the same mounting points on the inner wing, is a bracket for the additional "water pump" (as quoted to me by a Vx spare person). it comes out into the engine bay at about 45 degrees and then has a "tongue" pointing upwards onto which a rubber mount fits to hold the "pump"
looking at the angle of the bracket, it won't clear the cuise unit if fitted to the same bolts on the wing, and can't fit on the other bolts as the bracket end would be about 2 inches out of alignment with the "pump" (ie closer to the rad).
according to the spares guy, there is no seperately listed bracket for cruise fitted models (as there is for other parts).

so, has any one a manual mv6 with cruise that could explain how the "quart" of brackets fits into the "pint" of bolts and space available?

cheers
max
Title: Re: fitting cruise to a manual MV6
Post by: Dazzler on 12 October 2007, 21:52:48
Additional water pump :-/ Not heard of this.....
Title: Re: fitting cruise to a manual MV6
Post by: TheBoy on 12 October 2007, 22:01:34
Yeah, my MV6 was the same.  Just modified the mounting of the pump bracket...
Title: Re: fitting cruise to a manual MV6
Post by: hotel21 on 12 October 2007, 22:26:37
Have a look at the howtoo (http://www.omegaowners.com/forum/YaBB.pl?num=1166374649) then you will see whats required alongwith the relevant part number....

Mine was the same...    :y
Title: Re: fitting cruise to a manual MV6
Post by: ffcgary1 on 13 October 2007, 01:24:23
Mine too had the aux coolant pump and i followed ht21 exec guide to fit the cruise and the pump in the inner wing. a doddle to do mate.
 :y
Title: Re: fitting cruise to a manual MV6
Post by: Dazzler on 13 October 2007, 09:32:48
Do they all have this extra waterpump then????? Does the Omega need 2 ???
Title: Re: fitting cruise to a manual MV6
Post by: JasonH on 13 October 2007, 11:30:38
The extra water pump is a bit random. It's meant to keep the coolant circulating when the engine is off so that the interior heater works for a bit after the engine is off.

Cars that came with cruise as standard generally don't have the pump, whilst equivalent models, same year without cruise may have the pump fitted....
Title: Re: fitting cruise to a manual MV6
Post by: Andy B on 13 October 2007, 11:33:23
Quote
The extra water pump is a bit random. It's meant to keep the coolant circulating when the engine is off so that the interior heater works for a bit after the engine is off.

Cars that came with cruise as standard generally don't have the pump, whilst equivalent models, same year without cruise may have the pump fitted....

My Elite with standard cruise has its electric water pump by the rad, near side at the top.
Title: Re: fitting cruise to a manual MV6
Post by: JasonH on 13 October 2007, 15:12:30
The cars the extra pump have the pump on the radiator as well!
Title: Re: fitting cruise to a manual MV6
Post by: gsxmax1 on 13 October 2007, 18:26:04
Quote
Have a look at the howtoo (http://www.omegaowners.com/forum/YaBB.pl?num=1166374649) then you will see whats required alongwith the relevant part number....

Mine was the same...    :y

Many thanks for the link.
Just need to get different holder for the aux pump and "mod" the control bracket.
also useful to know that being a 98 model it should just be plug and play, rather than an ecu "reboot"

cheers for all your help
Max