Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: Terry_Seyforth on 02 November 2007, 14:43:35
-
anyone know the size of the key needed to take out the sump plug, the oil seems over filled slightly, this to memory isnt good for the engine. 2002 2.6 vauxhall omega v6. thanks
-
should be a torx bit on yours, sorry don't know the size off hand.
-
If its a torx bit its a t45
-
anyone know the size of the key needed to take out the sump plug, the oil seems over filled slightly, this to memory isnt good for the engine. 2002 2.6 vauxhall omega v6. thanks
A set of something like these (http://cgi.ebay.co.uk/10pc-3-8-MALE-TORX-SOCKETS-TORX-SCREWDRIVERS-BITS_W0QQitemZ120176514289QQihZ002QQcategoryZ30917QQssPageNameZWDVWQQrdZ1QQcmdZViewItem)
(http://i22.ebayimg.com/03/i/08/85/3b/3a_2.JPG) wouldn't go amiss if you have an Omega.
You could do with some of these too (http://www.machinemart.co.uk/shop/product/details/pro44-14-pce-tx-bit-set)
(http://www.machinemart.co.uk/images/library/product/medium/04/040211665.jpg?)
-
By the time you've bought those two, may as well get the halfords kit...
-
By the time you've bought those two, may as well get the halfords kit...
? ? ? :-? If you're going to buy a male Torx drive for the sump you might as well buy the set as you'll use most of them, same as the socket/female Torx. The above socket Torx are c£25 and even if you paid the same for the male set that still leaves you £100 away from the full retail price of the ever popular Halfords kit!
-
Hi thanks, I will look around and see what I can purchase. I thought the slot looked odd :-/, couldnt see to well.
Thanks for info.
What would I do without you all :y