Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: harleyman on 10 November 2007, 09:50:00

Title: Onboard Computor
Post by: harleyman on 10 November 2007, 09:50:00
Hi just wondering if someone can help i bought a 2.2cd auto omega 2003 model last week and the onboard computer was telling me how much fuel i had left in the tank since yesterday it's now got a stop watch going and i can't get it back to how is was how do you change the dam thing the dealer never gave me any manuals for it
Title: Re: Onboard Computor
Post by: Auto Addict on 10 November 2007, 09:53:58
If you register with www.vauxhall.co.uk you can download a PDF file of the manual.

In the meantime, the buttons on the end of the wiper stalk change the display.
Title: Re: Onboard Computor
Post by: Auto Addict on 10 November 2007, 09:55:37
In the meatime, have a read through the 'Maintenance' Section, there's alot of info. on keeping your 2.2 running in tip top condition.
Title: Re: Onboard Computor
Post by: TheBoy on 10 November 2007, 17:00:26
Yup, the S and R buttons on the wiper stalk will reveal all
Title: Re: Onboard Computor
Post by: Neil_MV6 on 10 November 2007, 17:06:52
The wiper stalk has two buttons on the end, one at the front and one at the back.

The one closest to you scrolls through the available options and the rear button will reset the display to zero if you hold it in for a few seconds.
Title: Re: Onboard Computor
Post by: Taxi_Driver on 11 November 2007, 09:16:57
Quote
The wiper stalk has two buttons on the end, one at the front and one at the back.

The one closest to you scrolls through the available options and the rear button will reset the display to zero if you hold it in for a few seconds.

Something I discovered......as you say hold it for a few secs and the display...shows --.-- and resets just that one setting......keep holding it after --.-- is shown and the display then shows **.** and resets everything.
Title: Re: Onboard Computor
Post by: CaptainZok on 11 November 2007, 17:07:23
Quote
Quote
The wiper stalk has two buttons on the end, one at the front and one at the back.

The one closest to you scrolls through the available options and the rear button will reset the display to zero if you hold it in for a few seconds.

Something I discovered......as you say hold it for a few secs and the display...shows --.-- and resets just that one setting......keep holding it after --.-- is shown and the display then shows **.** and resets everything.
Didn't know that TD, will be easier when I fill up as I usually reset all trips then.