Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Varche on 11 November 2007, 14:20:10

Title: Breather cleaning gaskets/O rings
Post by: Varche on 11 November 2007, 14:20:10

Had a look at Mr Mcburgers excellent how to clean breathers.

I am going to get the breather bridge  "o" rings but do you need two O ring seals for the throttle body where it meets the main cast alloy housing? If so does anyone know the part numbers for a 97 V6 2.5 please?

varche

Title: Re: Breather cleaning gaskets/O rings
Post by: Jay w on 11 November 2007, 15:01:49

i have cleaned a few in the past and i have never spilt the throttle body from the plenium in the past

Title: Re: Breather cleaning gaskets/O rings
Post by: Darth Loo-knee on 11 November 2007, 15:43:14

I did not put a new gasket on mine when I removed the throttle body from the plenum, had no problems :y

Title: Re: Breather cleaning gaskets/O rings
Post by: Pete Elite on 12 November 2007, 01:01:52

 Hi Varche,
               If they are the same as the 3.0L which i would think they are then the number is 90412566.

      Pete :y.

Title: Re: Breather cleaning gaskets/O rings
Post by: Varche on 12 November 2007, 16:43:44

Great, I'll get some and replace them all as no doubt they will be flat.

Thanks, varche

Title: Re: Breather cleaning gaskets/O rings
Post by: Tony H on 12 November 2007, 17:58:39

Quote

I did not put a new gasket on mine when I removed the throttle body from the plenum, had no problems :y

I cleaned my breathers and throttle bodys a few months ago and noticed the was no gasket between the plenum and throttle bodys is there supposed to be one? :-/

Title: Re: Breather cleaning gaskets/O rings
Post by: Darth Loo-knee on 12 November 2007, 18:02:07

Quote

Quote

I did not put a new gasket on mine when I removed the throttle body from the plenum, had no problems :y

I cleaned my breathers and throttle bodys a few months ago and noticed the was no gasket between the plenum and throttle bodys is there supposed to be one? :-/

There is two, one for each  :y

Title: Re: Breather cleaning gaskets/O rings
Post by: Tony H on 12 November 2007, 18:39:18

The last person that had the throttles off can't of replaced them then >:(