Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: barclay03 on 07 November 2007, 12:29:34
-
just wondering if its possible to put the clearer facelift lights onto a pre-facelift car? if so, how do you do it?
-
you're talking about headlights yes?
Omega VXR (Lee) did his, but he completely facelifted the entire front end of his car so i dont know really
-
yea, headlights, hmm... will have to have a chat with him lol
-
AS FAR AS I AM AWARE THEY WILL FIT, BUT THE PLASTIC TRIM BELOW DOES NOT LIKE THE LATER LIGHTS, AND THEY DONT FIT AS WELL. :(
-
They are a different shape and don't fit too well. Mini facelift lights are a better option ;)
-
is this barclay who had the 16v ax?
im very interested in this as well, the headlights on my omega are shocking!! cant see a thing on country roads, had to drive using the cateyes!
-
is this barclay who had the 16v ax?
the very same lol
-
Mine was the same ,fitted aftermarket kits now perfect..Possibly for UK illegal
-
part of the reasoning behind it is preferring the clear look of the facelift ones aswell
-
personally dont see too much difference..I think a good vision in the night is more critical..And better than using cateyes
-
Mine was the same ,fitted aftermarket kits now perfect..Possibly for UK illegal
by after market do u mean just bulbs or HID (gas discharge) kits?
-
Mine was the same ,fitted aftermarket kits now perfect..Possibly for UK illegal
by after market do u mean just bulbs or HID (gas discharge) kits?
HID kits..Not expensive..
-
Hi, just upgraded my headlights, which were so bad I failed the MOT, to the newer mini-facelift (~'98) clear headlights. Mine were imitation ones made by TYC (I saw also some from DEPO) which were considerably cheaper than original Hello units. Looked practically identical though. I got them from a mail-order comany here in Holland for 130 euro who advertised on the net. Just bolt them in, new lamps and get them aligned by garage/MOT place. Needless to say, the dealer was going to change about 4 times that for the same.
Dead chuffed now. Can see again at night :D
-
The lamps made by depo do not have the fixing lugs and hole for the ajustment motors and cant be ajusted inside the car on the switch ::)
-
OK, well the ones I have from TYC had the hole where the height adjustment servo from the old just slots in. I explicitly checked this before I bought. Fitted exactly as originals did. Obviously there is some inferior replacement lights around.