Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: brett1408 on 24 November 2007, 12:18:33

Title: recoding remotes
Post by: brett1408 on 24 November 2007, 12:18:33

can anyone tell me please the correct way of coding the remote locking handset to the car, drive vauxhall say the instructions are in the owners handbook which i dont have! the main one is starting to play up and the spare stopped working ages ago, mines the seperate fob to the key on a p reg 96 3.0 elite auto.

Title: Re: recoding remotes
Post by: Dave-C on 24 November 2007, 13:33:36

The book says,

Syncing Remotes

Switch on ignition to position 2 ,sync will be allowed for 30 secs.

Press either button on the remote within this time,  the central locking locks and unlocks to confirm...

This will only work with existing remotes... not new additional ones, they need a tech2 programming..

DC  Mines a 1999 Elite though...

Title: Re: recoding remotes
Post by: TheBoy on 24 November 2007, 19:28:01

Quote

The book says,

Syncing Remotes

Switch on ignition to position 2 ,sync will be allowed for 30 secs.

Press either button on the remote within this time,  the central locking locks and unlocks to confirm...

This will only work with existing remotes... not new additional ones, they need a tech2 programming..

DC  Mines a 1999 Elite though...

same for all rf based ones (later 95 onwards)

Title: Re: recoding remotes
Post by: chartz on 03 September 2013, 12:44:22

Hi,

Thanks for the tip. My remote had stopped working after a weak battery replacement and syncing worked fine!

Jacques