Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: zealious on 25 November 2007, 03:20:25
-
Bad misfire on cylinder 6. Ive already replaced the spark plug and will do wires soon. I found that water had been getting into the well. the wire looks fine but i will replace just to see. Is there anything else i should be looking for to cause the misfire? car is at 96k miles and has been just sitting for 4 months.
Would appreciate some help. ;)
-
Sounds like the dis unit/coil pack. :y
-
eek i hope not, wires are 150 us. I just need to get the thing running so i can sell the damn thing. what gave it away to be the dis pack? is that a common problem?
-
Yes it's very common :(. Have you lifted the bonnet in the dark, revved it and checked for arcing? It could be a lead but my moneys on the dis pack...
-
Yea im thinking its the dis/coil too. I swapped out all my spark plugs. No luck. The strange thing is that it only starts missing after about 10 minutes when the engine is warm. Where does this point? I did get the leads today, so im going to try them out and hope for the best. Just the coil by its self is 500 usd =( .
Yes it's very common Sad. Have you lifted the bonnet in the dark, revved it and checked for arcing? It could be a lead but my moneys on the dis pack...
I didnt know you could do this. how would you go about? do you remove the leads or what?
thanks for all the help fellows.
changing out leads looks like a night mare. I have no idea how im supposed to get my hands back there anyone got some advice?
-
Yea im thinking its the dis/coil too. I swapped out all my spark plugs. No luck. The strange thing is that it only starts missing after about 10 minutes when the engine is warm. Where does this point? I did get the leads today, so im going to try them out and hope for the best. Just the coil by its self is 500 usd =( .
Yes it's very common Sad. Have you lifted the bonnet in the dark, revved it and checked for arcing? It could be a lead but my moneys on the dis pack...
I didnt know you could do this. how would you go about? do you remove the leads or what?
thanks for all the help fellows.
changing out leads looks like a night mare. I have no idea how im supposed to get my hands back there anyone got some advice?
Ebay UK?
-
GREAT NEWS.. IT WAS THE LEAD WIRE ON MY 6TH CYLINDER. I GUESS THE WATER STARTED TO DAMAGE IT
-
GREAT NEWS.. IT WAS THE LEAD WIRE ON MY 6TH CYLINDER. I GUESS THE WATER STARTED TO DAMAGE IT
:y
-
GREAT NEWS.. IT WAS THE LEAD WIRE ON MY 6TH CYLINDER. I GUESS THE WATER STARTED TO DAMAGE IT
:y