Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: unclelicklug on 18 December 2007, 08:30:03

Title: Facelift Hazard Switch - removal, where to buy
Post by: unclelicklug on 18 December 2007, 08:30:03

Following on from my post yesterday - thanks guys, assuming I need to replace the switch does it just pull out, and is there a good supplier?
Thanks again
Rick

Title: Re: Facelift Hazard Switch - removal, where to buy
Post by: tunnie on 18 December 2007, 09:53:20

Whole button or just the front? front can be replaced easy.

i replaced mine cause the button was starting to peel.

I got a replacement from a scrapyard.... freebie  :-X

Insert a flat head screw driver on the right hand side (drivers side) there should be a little slot to get a screw driver in there, just ping it out. and push the new cover on.

Title: Re: Facelift Hazard Switch - removal, where to buy
Post by: unclelicklug on 18 December 2007, 10:00:36

Thanks - I think it will have to be the whole thing as it seems to be stopping my indicators working!

Title: Re: Facelift Hazard Switch - removal, where to buy
Post by: Marks DTM Calib on 18 December 2007, 10:02:19

Once the front section is off, remvoal is fairly obvious (from memory).

There not that pricey from the dealers....