Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: smity on 25 December 2007, 10:54:39

Title: Clearing fault codes
Post by: smity on 25 December 2007, 10:54:39

is there any way of clearing the fault codes other than tech2?

Title: Re: Clearing fault codes
Post by: Paul on 25 December 2007, 11:17:53

Im not sure will it work in Omegas, but on other engines such like X20XEV and C25XE you can try to disconnect battery for about 15-20 mins, or try to switch ignition on - off for at least 20 times.

Title: Re: Clearing fault codes
Post by: VXL V6 on 25 December 2007, 11:18:07

Yes, either cheapo eBay TechII (about £30) or Opelscanner (about £250). On some ecu's if you have 30 or so clear starts / runs the code will clear from the current codes.

Title: Re: Clearing fault codes
Post by: smity on 25 December 2007, 11:30:23

Yeah im going grab my self a tech 2 from ebay next week!

Wanted to clear the codes now to see if it pops up again. Ill try that thank you  ;D

Title: Re: Clearing fault codes
Post by: VXL V6 on 25 December 2007, 11:45:43

The cheapo TechII is VERY basic, it will clear most codes but a lot of the software interface is Hungarian.
If all you want to do is clear codes it should do that for you.