Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: kbou55 on 04 January 2008, 12:46:17

Title: How to flush 2.5 TD coolant??
Post by: kbou55 on 04 January 2008, 12:46:17

I'm eager to flush the tractor and use the red anti-freeze but ive never done it before so im looking for some guidance before i make an ape of it.

How to drain it, how much coolant does it take, will i need to bleed it etc etc

thanks lads. :y :y

Title: Re: How to flush 2.5 TD coolant??
Post by: tunnie on 04 January 2008, 13:52:14

i remember the tractor well for this....  :(

I belive there is a plug on the engine, right at the back on the drivers side??? someone will confirm.

Ohh yess and be prepared to get soaked!

Title: Re: How to flush 2.5 TD coolant??
Post by: kbou55 on 05 January 2008, 19:05:46

Anyone else with some more advice for me?

Title: Re: How to flush 2.5 TD coolant??
Post by: TheBoy on 05 January 2008, 19:59:45

Rad drain tap on passenger side bottom of rad.

Engine drain plug, drivers side, about 2" above sump, towards rear.  15mm socket iirc, and yes, as Tunnie says, you will get wet!