Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: mark.adams on 11 January 2008, 09:49:35
-
Is there a how-to on this, just had a quick look and couldn't see one, i may be keeping my baby after all so i want to know everything there is to know about keeping it tip top....
-
I'm not sure there is specifically but plenty of posts on it if you search. Its in the book of lies too.
-
Mark,
There is this though that will help filling it up.
http://www.omegaowners.com/forum/YaBB.pl?num=1152783586
Cheers
Ian
-
Mark,
There is this though that will help filling it up.
http://www.omegaowners.com/forum/YaBB.pl?num=1152783586
Cheers
Ian
Yes, remember creating that one.... :y
-
quite entertaining trying to keep the hose I was using off the hot exhaust I seem to recall :(
You don't mention the changing gear bit while topping up Mark . How necessary is that to get the level correct?
-
quite entertaining trying to keep the hose I was using off the hot exhaust I seem to recall :(
You don't mention the changing gear bit while topping up Mark . How necessary is that to get the level correct?
Not important of just topping up (as the galleries should already be full).....more essential when doing a change.
-
The guide is for topping up so in that case the box should already be primed. If you are changing the fluid completely (ie. dropping the sumps and cleaning / replacing the filter) then it is necesary to engage each gear to allow the fluid to flow.
EDIT... I wish I could type faster!
-
thanks - I'll be checking it again when I next do an oil change.
..maybe worth a comment on the guide as I am sure many people use this when doing an ATF change..?
-
thanks - I'll be checking it again when I next do an oil change.
..maybe worth a comment on the guide as I am sure many people use this when doing an ATF change..?
Now that is a very good idea... :)
-
Also, a 500cc syringe with a long tube might help, both to empty the main sump before dropping it (to minimise spillage), and also for topping-up afterwards....