Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: MutantCav on 13 January 2008, 21:38:42

Title: Are the load covers the same pre and post facelift
Post by: MutantCav on 13 January 2008, 21:38:42

As above...did they change the load covers for facelift estates?

Title: Re: Are the load covers the same pre and post facelift
Post by: Matchless on 13 January 2008, 22:15:30

Two types of cover on pre-facelift:
Early has straight-cut teeth on the gears and runners, later has helical gears. Cover is the same so you can swap the rods over if necessary.

Dont know about face-lift but might have adopted the same style as late Astra and Vectra where the removable bits of guide exit upwards from the side rail so quite different.