Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: mrjimbo on 14 January 2008, 20:08:09
-
I'm trying to identify what these connecters are for. They are behind the headlining.........
The first 2 pictures are the connecters behind the left hand side of the headlining and just above the top of the windscreen
the second 2 pics are of the connecters behind the headlining near to the curtesy light at the top of the windscreen.
(http://i267.photobucket.com/albums/ii316/mrjimbo-2008/DSC00140.jpg)
(http://i267.photobucket.com/albums/ii316/mrjimbo-2008/DSC00139.jpg)
(http://i267.photobucket.com/albums/ii316/mrjimbo-2008/DSC00142.jpg)
(http://i267.photobucket.com/albums/ii316/mrjimbo-2008/DSC00141.jpg)
I found them when i was looking for the aerial cable and supplies to the
rear grab handle curtesy lights and load area light.
-
You need to host your pictures on a host site like photobucket and then link to them.
-
Got there in the end ;D
Me and computers ain't a good combination sometimes :-[
-
Auto dim mirror :-/
-
Not to sure about the first pic but, in the second pic the large connector is for the later courtesy light and the small one is for the sun visor illuminated mirror
-
I think the smaller connector on the first picture is for the microphone that is fitted inbetween the courtesy lights on late Elites, the bigger connector in the same picture may be for electric memory adjustment of the mirror, again, part of Elite spec.
Guess the looms are common to cut down production costs.
-
Cheers peeps :y