Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: stuvaux on 15 January 2008, 00:16:09

Title: Re: water trouble 2.5v6 lpg
Post by: stuvaux on 15 January 2008, 00:16:09

To me, this suggests either the HBV (Heater Bypass Valve) itself, or the matrix/piping to matrix.
The HBV closes when the heaters are set to cold, cutting off the water supply to the matrix. So the problem is somewhere HBV onwards.....

I'm sure someone more knowledgeable will confirm.....

Stu

Title: Re: water trouble 2.5v6 lpg
Post by: The Cambelt Kid on 15 January 2008, 21:52:59

Don't quite understand the problem you have.  Are you saying that you are leaking water?

I am leaking a small amount of water on my DIY LPG and i recon the water pipes from the HBV to the evaporator are to blame.  When i connected the water pipes to the HBV i found it very difficult due to lack of space, so im sure this is where my problem is - Sounds simular to your problem too...

Cheers

Title: Re: water trouble 2.5v6 lpg
Post by: stuvaux on 15 January 2008, 23:35:58

not sure what has happened there......mine was a reply to someone else's post..... :-/

Stu