Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Hammers on 23 January 2008, 15:36:06

Title: Vectra alloys question
Post by: Hammers on 23 January 2008, 15:36:06

Seen a couple of 19 inch vectra alloys on E-bay. Does anyone know if these will fit on a omega? They appear to be 5 stud so im hoping they will. Any advice would be helpful. Thanks in advance. :y :y :y

Title: Re: Vectra alloys question
Post by: Jay w on 23 January 2008, 16:04:14

they will fit, but the offset is not the same as the Omega, this means that the Vectra wheels look slightly 'pinched' when on an Omega.

i have a feeling that there may be a handling implication as well, but not 100% sure

Title: Re: Vectra alloys question
Post by: Danny on 23 January 2008, 16:59:21

the offset of vectra alloys for the 2002 model onward is the same as the omega, 5x110, et35-45 and bore 65.1, the older vectra on 5 stud was the same but bore 56.1 so it depends what year they're off

the tyre size will need to be changed though probably