Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: TheBoy on 07 February 2008, 21:19:45
-
Are the rears the same for saloons?
-
Are the rears the same for saloons?
Yes, its just the interior door handle that needs changing and doorcard
-
Are the rears the same for saloons?
Yes, its just the interior door handle that needs changing and doorcard
and rubber strip, coz prefacelift is black ;)
-
Are the rears the same for saloons?
Yes, its just the interior door handle that needs changing and doorcard
and rubber strip, coz prefacelift is black ;)
Aye that too!!, but there are diffirent holes on the bodywork of the facelift than the pre-facelift to attach the doorstrips.
-
Are the rears the same for saloons?
Yes, its just the interior door handle that needs changing and doorcard
and rubber strip, coz prefacelift is black ;)
Aye that too!!, but there are diffirent holes on the bodywork of the facelift than the pre-facelift to attach the doorstrips.
ahhh, tell me more....
-
Are the rears the same for saloons?
Yes, its just the interior door handle that needs changing and doorcard
and rubber strip, coz prefacelift is black ;)
Aye that too!!, but there are diffirent holes on the bodywork of the facelift than the pre-facelift to attach the doorstrips.
ahhh, tell me more....
If you remove the colour coded door mouldings on the facelift door, there is a series of holes about 5-6cm apart along the length of the door to clip the moulding to the door and there is a screw at each end of the moulding which you loosen from the inside of the door,
the pre-facelift door strip is held by double sided sticky foam and 2 plastic clips one at each end
-
Are the rears the same for saloons?
Yes, its just the interior door handle that needs changing and doorcard
and rubber strip, coz prefacelift is black ;)
Aye that too!!, but there are diffirent holes on the bodywork of the facelift than the pre-facelift to attach the doorstrips.
ahhh, tell me more....
If you remove the colour coded door mouldings on the facelift door, there is a series of holes about 5-6cm apart along the length of the door to clip the moulding to the door and there is a screw at each end of the moulding which you loosen from the inside of the door,
the pre-facelift door strip is held by double sided sticky foam and 2 plastic clips one at each end
So can I fit prefacelift strips to facelift door?
-
Are the rears the same for saloons?
Yes, its just the interior door handle that needs changing and doorcard
and rubber strip, coz prefacelift is black ;)
Aye that too!!, but there are diffirent holes on the bodywork of the facelift than the pre-facelift to attach the doorstrips.
ahhh, tell me more....
If you remove the colour coded door mouldings on the facelift door, there is a series of holes about 5-6cm apart along the length of the door to clip the moulding to the door and there is a screw at each end of the moulding which you loosen from the inside of the door,
the pre-facelift door strip is held by double sided sticky foam and 2 plastic clips one at each end
So can I fit prefacelift strips to facelift door?
Yes you can, if you wait until tomorrow I'II get some pic's of my black mv6 doors which have the door strips removed at the mo and you'll see what I'm talking about :y
-
Are the rears the same for saloons?
Yes, its just the interior door handle that needs changing and doorcard
and rubber strip, coz prefacelift is black ;)
Aye that too!!, but there are diffirent holes on the bodywork of the facelift than the pre-facelift to attach the doorstrips.
ahhh, tell me more....
If you remove the colour coded door mouldings on the facelift door, there is a series of holes about 5-6cm apart along the length of the door to clip the moulding to the door and there is a screw at each end of the moulding which you loosen from the inside of the door,
the pre-facelift door strip is held by double sided sticky foam and 2 plastic clips one at each end
So can I fit prefacelift strips to facelift door?
Yes you can, if you wait until tomorrow I'II get some pic's of my black mv6 doors which have the door strips removed at the mo and you'll see what I'm talking about :y
Appreciaated :y
Don't suppose you have spare MV6 wheels ;)
-
Are the rears the same for saloons?
Yes, its just the interior door handle that needs changing and doorcard
and rubber strip, coz prefacelift is black ;)
Aye that too!!, but there are diffirent holes on the bodywork of the facelift than the pre-facelift to attach the doorstrips.
ahhh, tell me more....
If you remove the colour coded door mouldings on the facelift door, there is a series of holes about 5-6cm apart along the length of the door to clip the moulding to the door and there is a screw at each end of the moulding which you loosen from the inside of the door,
the pre-facelift door strip is held by double sided sticky foam and 2 plastic clips one at each end
So can I fit prefacelift strips to facelift door?
Yes you can, if you wait until tomorrow I'II get some pic's of my black mv6 doors which have the door strips removed at the mo and you'll see what I'm talking about :y
Appreciaated :y
Don't suppose you have spare MV6 wheels ;)
No sorry,
I'II get the picture's this afternoon of the door mouldings
-
Door strips - the main aging of the prefacelift design
-
Are the rears the same for saloons?
Yes, its just the interior door handle that needs changing and doorcard
and rubber strip, coz prefacelift is black ;)
Aye that too!!, but there are diffirent holes on the bodywork of the facelift than the pre-facelift to attach the doorstrips.
ahhh, tell me more....
If you remove the colour coded door mouldings on the facelift door, there is a series of holes about 5-6cm apart along the length of the door to clip the moulding to the door and there is a screw at each end of the moulding which you loosen from the inside of the door,
the pre-facelift door strip is held by double sided sticky foam and 2 plastic clips one at each end
So can I fit prefacelift strips to facelift door?
Yes you can, if you wait until tomorrow I'II get some pic's of my black mv6 doors which have the door strips removed at the mo and you'll see what I'm talking about :y
Appreciaated :y
Don't suppose you have spare MV6 wheels ;)
Doesn't Markeymark have a set for sale? :-/
-
http://www.omegaowners.com/forum/YaBB.pl?num=1199361754/15#15
Or are these not what your after :-/
-
i think the hinges are a bit different, have put a pre f/l door on a f/l before and it would only open up about 2/3rds of the way! had to get a grinder on the hinge
not sure about f/l on a pre f/l tho