Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: menace on 10 February 2008, 22:50:16

Title: Heater problem
Post by: menace on 10 February 2008, 22:50:16

HELP! My 2.0ltr miggy has no heat coming from the heater matrix. Have recently changed thermostat thinking that was my problem, so then thought i must have an airlock, so left it running with the cap off. Still no heat, but have nice frosted windscreen on the inside every morning! Both hoses to the matrix get hot ,so i assume that the only thing left is to flush the heater matrix. Can i clamp off both hoses so that i don t lose my new coolent before i attempt to flush or have i missed something. Heater worked fine until i changed the thermostat.  [smiley=sad.gif]

Title: Re: Heater problem
Post by: Marks DTM Calib on 11 February 2008, 08:20:55

Check and double check the vac feed to the heater setup....

With the engine running, when you turn the direction control dial, does the air direction change?