Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: khatton on 10 February 2008, 18:25:20
-
anyone know what i can do about missing pixels on my dash display apart from get a new one
ps thanks to andy b once again much appreciated
khatton
-
how old is your car? Is it the full MID or TID? its a common problem on pre 1998 mini facelift models.
They can be fixed, there is a guide in the maintaince section.
Its best just to replace it, they are cheap enough!
-
its on a p plate do you know where i can get one and how much please
-
its on a p plate do you know where i can get one and how much please
I have one in the cupboard, came from a donor clock display, will post a pic of it up, as I don't know what model or year the display came out of.
-
its the left hand lcd display im after your pics show the spedo ect am i being thick or missing something cant find the fixing guide in the matanance section only removal of the display
sorry to a pest :-[
-
its on a p plate do you know where i can get one and how much please
I have one in the cupboard, came from a donor clock display, will post a pic of it up, as I don't know what model or year the display came out of.
I'm guessing yours will be later type (single grey connector, and computer lines above radio line), not the early type (2 connectors - yellow and black, computer lines below radio line)
-
Apologies but can't seem to fid the LCD display, pretty certain there was one with the complete housing when i bought it from the scrappy, but it ain't there, sorry mate :-/
-
was going to put picture of it i just took but cant figure out how to quick enough any one know how i post pics please
-
was going to put picture of it i just took but cant figure out how to quick enough any one know how i post pics please
You need to upload you photo to a hosting site such as http://www.flickr.com
Dead simple to set up.
Insert Image Syntax: is
[img ]INSERT PICTURE'S URL HERE[ /img]
Remove the spaces from inside the square brackets []
The pic url is easy to get by right clicking on the picture and selecting "Properties"
-
will sus that out soon thanks and thanks to mikedundee for looking for me will try to find this repair guide now thanks to all
respectfully
khatton :y
-
I have 2 perfectly working MID's here, one with the single grey connector (from a 98 MV6) and the other the black and yellow connectors (from a 95 Elite) so whichever you need let me know and I will sort it for you...if you have a 98 Omega then it will have an MID and not a TID...you may need to remove the MID though to check the connector on the back...its easily done, should take 5-10 mins :)
-
its a mid how much for it please
-
£35 including postage :)
-
could you keep it for a week or 2 for me need to do cambelt first but willl have it from you soon if poss
cheers :y
-
Sure mate but you will need to check which one you need...10 minute job to whip the display out....probably the grey connector but best to check which one cos I need to know which one to hold back if someone wants the other :)
-
If computer lines below radio line, it has yellow/black connectors. If it has computer lines above radio line, it has grey connector.
If yeelow/black, it needs to come from same engine/gearbox combo, else will need reprogramming via tech2. If grey connector, it needs to be same engine/gearbox/tyres/headlights etc type, else will need reprogramming with tech2
-
Useful info mate, thanks :)
-
oh dear will try to fix this first then thanks guys