Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: bigdods on 14 February 2008, 15:57:13
-
Im wondering if my warning lights are working. When I turn the ignition on I get an orange light with a picture of an engine on. I always assumed this was the EML. I have seen a few posts about a light with a spanner on it and looking closesly at my dash I can see that picture but it doesnt light up when I turn the ignition on. If I look in the user manual it says that I should have either the engine block light OR the spanner light. Is that correct ? Is the engine block light the EML, should the spanner light come on with the ignition too ?
Facelift 3.0 Elite
Cheers
Dodsy
-
Hi,
Orange light with spanner comes on as well as EML on mine, then both go off when engine started.
Roger
-
Hi,
Orange light with spanner comes on as well as EML on mine, then both go off when engine started.
Roger
Spanner light is not used on 3.0, 2.5, 2.0 and disiesel.....
-
I can confirm that it works in 2.2 but doesnt work in 2.0. Don't know why, but might be just new ECU.
-
Hi,
Orange light with spanner comes on as well as EML on mine, then both go off when engine started.
Roger
Spanner light is not used on 3.0, 2.5, 2.0 and disiesel.....
*phew* that means I dont have to take the dash out and change the bulb then :)