Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: vince2203 on 13 February 2008, 22:54:57
-
Another one for you wonderful dudes!!
My indicator stalk/high beam switch seems to have some sort of problem. Whenever I put my indicator on my high beam comes on too and I have to flash my lights to switch it off!
Any suggestions...?
Cheers again guys...
-
The stalk is worn.
The tab that works the high beam wears with high use and you get the high beam flicking on and off when indicating etc.
Only answer is to change the stalk......about 30+vat trade....
Beware of the cheaper ebay items, they work but are not as good as the GM parts,
-
Cool...i'll see if I can get hold of one. Is this easy to do yourself?
-
Cool...i'll see if I can get hold of one. Is this easy to do yourself?
Very easy to do, I had the same problem and changed the stalk on my elite at the weekend, it took about 15 mins :y
-
Ive got some spare ones if you need one mate.
May even have one with cruise control buttons on it if needed.
-
Dont be tempted by 2nd hand stalks - they will soon go same way.
Go splash some cash at dealers for a new one :)
-
The stalk is worn.
The tab that works the high beam wears with high use and you get the high beam flicking on and off when indicating etc.
Only answer is to change the stalk......about 30+vat trade....
Beware of the cheaper ebay items, they work but are not as good as the GM parts,
i got one off ebay a few weeks ago,sorry i did now ,it switches the indicators off far too quickly...get genuine vx :y
-
Thanks to all...ordered a new one the other day so fingers crossed it should turn up soon!