Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Not A Salmon on 15 March 2008, 11:48:29

Title: Fanbelt layout 3.0 V6
Post by: Not A Salmon on 15 March 2008, 11:48:29

Has anyone got any pictures or diagrams showing the route the long belt on the front of the engine (between the front of the engine and the back of the radiator) takes on a 3.0 V6 Omega with air con. Mine has stripped and come off, and I can't figure out where it goes.  >:(

Title: Re: Fanbelt layout 3.0 V6
Post by: rad cap on 15 March 2008, 12:25:37

if you ring me i will go and look at mine and talk you trhough it if thats helps. will send u pm

Title: Re: Fanbelt layout 3.0 V6
Post by: Marks DTM Calib on 15 March 2008, 12:30:18

Ta da....

(http://i23.photobucket.com/albums/b394/Marks_DTM_Calib/V6beltlayout.jpg)

Version I is for no aircon

Version II is the standard install

Version III is mega old and if you have this setup then any new belt will need to be routed as per version II ignoring the extra pulley

Title: Re: Fanbelt layout 3.0 V6
Post by: rad cap on 15 March 2008, 12:31:37

that will keep him busy,

Title: Re: Fanbelt layout 3.0 V6
Post by: Not A Salmon on 15 March 2008, 14:07:37

Well armed with this information and a trusty (though not entirely helpful) Haynes manual I should have it fixed in no time.

I think I'll just finish my lunch first lol

Thanks guys  :)