Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: dbug on 15 March 2008, 16:29:34
-
Got low beam fld/vision up on mid - 1998 2.5V6 Elite.
Checked sensors nsf and nsr - both intact but checked elec connections & partially stripped and freed up stiff arms.
Still have error.
Is this one of those that takes a nš of restarts to clear?
If not guess its the levelling motors.
Is there a how to on here? Or talk thro' from someone who has fixed these?
Thanx
-
These the correct part nšs 4 the levelling motors?
Part No. 90492832 (also 90457812)
Head light beam level adjustment motor.
My EPC software seems to have decided to pack up.
-
Got low beam fld/vision up on mid - 1998 2.5V6 Elite.
Checked sensors nsf and nsr - both intact but checked elec connections & partially stripped and freed up stiff arms.
Still have error. .......
My level sensors looked OK but the front one flagged up a fault via (proper) Tech II . A 'new' level sensor sorted the error.
-
levelling sensors in headlight bud take off plug and look at terminals most likely corroded ! if you need one gis a shout have a couple spares !! :y
-
Might be worth popping down and getting the headlights read, at least you will know what the fault is before spending money...
-
Might be worth popping down and getting the headlights read, at least you will know what the fault is before spending money...
Thanx 4 offer - will look at motors first - if everything looks ok i'll be in contact.
Cheers
-
Might be worth popping down and getting the headlights read, at least you will know what the fault is before spending money...
Thanx 4 offer - will look at motors first - if everything looks ok i'll be in contact.
Cheers
No probs :)